Welcome to our new website!
Fitting for a hand tine harrow
Fitting for the springs of a hand tine harrow for removing young weeds.
Détail du produit
Based on the same principle as our market gardening tine harrow, the tine harrow fitting is used to fasten the heavy or fine tines to a wood handle for the fast local weeding of small vegetable patches.
It's possible to fasten 7 springs, to which each tine is screwed separately. You can then remove the tines according to your needs as you see fit. For example:
- remove a tine in the middle in order to work the row;
- put 3 heavy springs on either side in order to work between the strips;
- put a fine spring in the middle in order to carry out some light work on the strip.
The purpose of this tine harrow is to minimise the growth of weeds until the latter can no longer compete with the crop. It works by tearing out and recovering the weed plantlets using the vibrations emitted by the tines in the soil.
The tine harrow works down to a depth of 3 cm and requires a flat surface without large clods of earth as well as dry conditions. It is still relatively efficient in stony soils but it would be better to avoid hardened topsoils and heavy earth.
Depending on the type of tine, it can be fully used on relatively short crops or post-seeding and pre-seedling (so-called "blind" use) on weeds that are at the filament stage. This must be followed by several days of dry and sunny weather in order to "scorch" the plants that have been torn out. It is therefore preferable to plan its use in advance.
Fitting sold without the set of springs and without the handle.
Number of springs 7
Height 147 mm
Weight 0.8 Kg
Warranty 1 year
Information Vendu sans ressorts
No customer reviews for the moment.
You might also like