Harvester on fixed station for aquaponics/microgreens
Motorized harvester for harvesting aquaponics or microgreens.
The main conveyor allows the transport of trays and rafts of 600mm width to a cutting blade (adjustable cutting height). Once the crop is cut at the right height, the second conveyor transports it to put it directly in the box.
Table equipped with swivel wheels with brakes to move on flat ground, ideally a concrete area. Harvesting machine can be handled by two operators to move the harvesting machine as close as possible to the bins and crops. Storage area to put harvesting boxes or to put trays of harvested crops.
The batteries are equipped with a safety device that prevents the packs from being discharged too deeply. The harvester is equipped with electric actuators powered by a 24V - 43Ah battery pack. Possibility to add a second battery pack to increase the working time.
Main conveyor motorized by a 250W motor, adjustable speed from 0 to 4,5m/min. Adjustable cutting height from 60mm to 220mm (distance between the cutter bar and the main conveyor belt). Like all Terrateck harvesters, a reel allows the crop to be pressed towards the harvesting conveyor at the time of cutting. This reel is adjustable so that it fits between the side lifters. Management of the different functions (cylinder / reel and harvester belt only / main conveyor only / total) on the main box and management of the speeds on remote wired control.
You might also like